Polyflex belts often focus on requirements that require compact drive concepts. High speeds, limited installation space and the required power transmission must be considered together. Therefore, it is not only the belt profile that is decisive, but the design of the entire drive.
Based on the technical requirements, we check which version is suitable for the respective application. In particular, the transferable performance plays an important role. This makes it possible to assess whether a single Polyflex belt is sufficient or whether a multi-strand composite belt is required.
Polyflex belts for high speeds
High speeds place special demands on a belt drive. At the same time, compact machines often have little installation space available. It is precisely this combination that makes careful technical design important.
For the selection, we therefore consider the performance requirements of the drive and the design conditions. On this basis, it is possible to determine which Polyflex belt is suitable for the respective application.
A blanket assignment according to belt dimensions is not sufficient. Only the consideration of the entire drive shows whether the selected design can transmit the required power under the intended conditions. Our
technical design supports you in determining the right solution for your application.
Checking Running Behavior and Vibrations in the Entire Drive
With a correctly designed V-belt drive, there are usually no major vibrations. If unsteady running does occur, the Polyflex belt should not be considered exclusively.
Imbalances or other abnormalities can indicate that other components of the drive need to be checked. Even in the event of heat generation or premature failure, the cause should not be looked for in isolation on the belt. It is crucial to look at the entire drive.
If there are any anomalies, we can assess the technical situation together with you. In the case of more complex claims, our
damage analysis helps to specifically investigate possible causes.
Select single belt or Polyflex JB composite belt by performance
Not every application requires several belts running in parallel. Whether a single Polyflex belt or a multi-strand Polyflex JB composite belt is used is determined by the technical design of the drive.
In particular, the power to be transmitted is decisive. Depending on the performance requirement, a combination of several belts may be the appropriate solution. It is therefore not possible to determine which design makes sense independently of the specific drive.
The following points are particularly relevant for the technical assessment:
- Power requirement: What power does the drive have to transmit?
- Speed: In which speed range does the drive work?
- Installation space: What constructive space is available?
- Execution: Is a single belt sufficient or is a composite required?
- Running behavior: Are there any abnormalities such as vibrations or imbalances?
This means that the focus is not on the number of belts, but on the technically appropriate dimensioning of the drive.
Replace Polyflex belts for discontinued versions
Even with existing machines, it can happen that an older Polyflex version is no longer available. For a replacement, an externally similar belt should not simply be selected.
After checking the existing drive, it is possible to switch to another belt type if necessary. We will discuss which alternative is possible together with you. The technical requirements of the machine must still be taken into account.
For older systems, such a reassessment can be useful if the original version can no longer be procured. Our
product changeover supports you in reviewing existing solutions and finding suitable alternatives.
Polyflex belts for compact high-speed drives
Polyflex belts are specially designed for compact drives with high speeds. Accordingly, they are used in various machines and devices where little installation space is available and yet a reliable drive solution is required.
Typical areas of application are, for example, machines and machine tools. These include table milling machines, lathes and spindle drives for wood and metal processing. Polyflex belts can also be used in smaller devices with precise drive tasks, such as small fans or printers.
However, which version is suitable for the respective application always depends on the specific performance requirement and the existing design.
Do you need a Polyflex belt for a compact high-speed drive, would you like to check an existing drive or are you looking for a replacement for a version that is no longer available? We support you in the technical design and coordinate the appropriate belt solution with you.
Have your Polyflex belt designed to fit now