Which version is technically and economically suitable for polyurethane timing belts does not depend solely on profile, width and length. Load, sequence of movements, installation situation and ambient conditions also influence whether an endlessly manufactured, endlessly welded or open timing belt is the better solution.
For the selection, we look at torque, speed, acceleration, center distance, preload and existing timing belt pulleys, among other things. Requirements for positioning accuracy, deflection diameter, maintenance accessibility and subsequent spare parts supply are also included in the evaluation. On this basis, a PU timing belt can be dimensioned according to the application without accepting unnecessary power reserves or service life restrictions.
Endless manufactured, welded or open PU timing belts?
Endlessly manufactured polyurethane timing belts have no connection point and are particularly suitable for high demands on dimensional accuracy, dynamics and uniform power transmission. BRECOFLEX timing belts and Synchroflex timing belts are available in numerous profiles, pitches and dimensions.
Endless welded BRECO timing belts enable lengths that are individually tailored to the system geometry. They are therefore an economically interesting solution if available endless lengths do not match the centre distance or if the timing belt is to be further processed for a transport task. Open PU timing belts made by the metre are mainly used where the belt ends are fastened constructively, for example in many linear and positioning drives.
Nevertheless, a blanket assignment does not make sense. The required load capacity, dynamics, running time and machine geometry must be considered together. Our application engineers therefore support you in the
technical design of polyurethane timing belts.
PU timing belts: compounds and tension members suitable for the application
In addition to the type of production, the polyurethane compound and tension member determine the behavior of the timing belt. For standard applications, proven material combinations are available. In the case of special operating conditions, we check whether a different design is necessary.
Depending on the product and manufacturer, for example, highly elastic tension members for small deflection diameters or versions with stainless steel tension members are possible. Specific PU compounds can also be adapted to requirements such as elevated or low temperatures, chemical influences or electrical conductivity. Which combination is suitable must always be evaluated on the basis of the specific application.
FDA-compliant materials are available for applications in food processing. However, since conformity depends on the respective material design, not every polyurethane timing belt is automatically suitable for food contact. Available documents on FDA, REACH, RoHS, TSCA and other requirements can be found in the
Certificates and Declarations of Conformity section. We will coordinate the required evidence with you on a product- and project-by-project basis.
Production Controls for Welded PU Timing Belts
The quality and design of the junction are particularly relevant for an endlessly welded timing belt. For this reason, defined internal production controls are carried out during machining. In addition, the timing belt is inspected before delivery as part of the outgoing goods inspection.
The scope of testing and documented characteristics depend on the agreed execution and the requirements of the project. If certain dimensions, tolerances or additional tests are to be proven, this should be coordinated before production. This allows it to be determined which controls and test documents are required for the respective order.
For more information on in-house machining, see
Welding Polyurethane Timing Belts.
Reproducible PU timing belts for spare parts and series orders
In the case of individually cut, welded or otherwise processed PU timing belts, a clear assignment for later orders is particularly important. For this reason, the respective article design is stored in our merchandise management system.
In the case of individually manufactured PU timing belts, this documentation creates the basis for reassigning the version carried by ROTH when ordering spare parts or series production. Before reproduction, we nevertheless check whether the specification, material and processing status are still available unchanged. In this way, we prevent technical changes or requirements that have been adapted in the meantime from being adopted unnoticed in a subsequent order.
availability of PU timing belts: BRECO, BRECOFLEX and Synchroflex
We stock a large part of the common standard goods. These include numerous Synchroflex timing belts as well as BRECO timing belts by the metre. Many regularly required welded versions can also be processed promptly.
Especially in the field of PU timing belts,
BRECO timing belts and BRECOFLEX timing belts offer a broad basis for drive, linear and transport tasks. Technical background information on the design, advantages and areas of application of endlessly manufactured designs can be found in our
technical article on BRECOFLEX timing belts.
Different throughput times apply to stock goods, blanks, welded timing belts and individual material designs. After specifying the profile, pitch, length, width and desired processing, we check the current stock as well as the required production effort and give you a realistic delivery date.
Do you need a standard design, an individual length or a special combination of materials? We check the application, type of production, material combination and availability and support you in the selection of a PU timing belt designed for the application.
Have your PU timing belts designed to fit the technology now