Classic wrapped or raw-edge V-belts according to DIN 2215 / ISO 4184 are used throughout the mechanical engineering sector. The standards define the different profiles, lengths, limiting dimensions, permitted centre distance fluctuations as well as the minimum diameter of classic V-belts. The belts are made of natural rubber, feature a polyester tension cord and a fabric wrapping to protect against external influences.Properties:
- Conditional resistance to oil
- Temperature-resistant from maximum -50° C to +120° C
- Dust-proof
- Suitable for tropical climates
- Dimensionally precise belts (from 1,000 mm by Conti)
- M=S (all lengths are identical)
Please refer to the respective data sheet for more detailed properties of the individual V-belts.
5/-
V-belts with profile 5 have the following dimensions according to DIN 2215: upper belt width 5 mm, belt height 3 mm. Rubber V-belts are used in general mechanical engineering and in special drives.
Optibelt VB
The Optibelt VB rubber V-belt is a classic V-belt, the values of which are significantly higher than the values required by DIN 2215. This permits excellent operational reliability and prevents overloading. The standard version of these classic V-belts is primarily used in mechanical engineering, while special versions are used in agricultural machinery and exceptional drive solutions. This raw-edge V-belt is available with profile 5.
Download data sheets
5/-
6/Y
V-belts with profile6/Y have the following dimensions according to DIN 2215: upper belt width 6 mm, belt height 4 mm. They are used in general mechanical engineering and also in special drives.
8/-
Traditional V-belts with profile 8 have the following dimensions according to DIN 2215: upper belt width 8 mm, belt height 5 mm. They are used in general mechanical engineering and also in special drives.
10/Z
Traditional V-belts with profile 10/Z are classified according to DIN 2215 and have the following dimensions: upper belt width 10 mm, belt height 6 mm. They are used in robust drives in general mechanical engineering.
CONTI-V®
This classic wrapped V-belt is classified according to DIN 2215 and is suitable for use in complex drives in general mechanical engineering. The CONTI-V® boasts a natural rubber core, a polyester tension cord and fabric wrapping. Typical uses include horticulture and agriculture.
Download data sheets
10/Z
13/A
Traditional V-belts classified according to DIN 2215 have the following dimensions with profile 13/A: upper belt width 13 mm, belt height 8 mm. Suitable for use in general mechanical engineering, they are particularly suitable for drives with small pulley diameters.
CONTI-V®
This classic wrapped V-belt is classified according to DIN 2215 and is suitable for use in complex drives throughout mechanical engineering. The CONTI-V® boasts a natural rubber core wrapped in fabric. The tension cord is made of polyester. Applications include horticulture and agriculture.
Download data sheets
13/A
Optibelt VB
Wrapped rubber V-belt classified according to DIN 2215. This classic V-belt is characterised by its broad range of uses and excellent operational reliability. Even challenging drives can be produced with special non-standard versions. The Optibelt VB is unmeasured and can be used in sets.
Download data sheets
13/A
17/B
Classic V-belts with profile 17/B are classified according to DIN 2215 and have the following dimensions: upper belt width 17 mm, belt height 11 mm. They are widely used in general mechanical engineering, however particularly in drives with small pulley diameters.
CONTI-V®
Optibelt VB
The Optibelt VB is a classic wrapped rubber V-belt. Its extensive applications and excellent operational reliability characterise this V-belt, classified according to DIN 2215. It is unmeasured and so can be used in sets, enabling challenging drives to be produced, thanks to special non-standard versions.
Download data sheets
17/B
20/-
V-belts with profile 20/-, classified according to DIN 2215, are classic rubber V-belts and have the following dimensions: upper belt width 20 mm, belt height 12.5 mm. These V-belts are predominantly used in drives with small pulley diameters in general mechanical engineering.
CONTI-V®
The classic rubber CONTI-V® V-belt is a wrapped V-belt classified according to DIN 2215. Its fabric wrapping, polyester tension cord and natural rubber core characterise this V-belt. The CONTI-V® is designed for drives throughout the field of mechanical and for use in horticulture and agriculture.
Download data sheets
20/-
Optibelt VB
This classic wrapped V-belt has a broad range of uses and excellent operational reliability. The Optibelt VB is classified according to DIN 2215, is unmeasured and hence can be used in sets. Even challenging drives can be produced with special non-standard versions of this rubber timing belt.
Download data sheets
20/-
22/C
Traditional rubber V-belts with profile 22/C are classified according to DIN 2215 and have the following dimensions: upper belt width 22 mm, belt height 14 mm. Their main fields of application include robust drives in general mechanical engineering, particularly drives with small pulley diameters.
CONTI-V®
The CONTI-V®, classified according to DIN 2215, is a classic wrapped rubber V-belt. It has a polyester tension cord, a natural rubber core and a fabric wrapping to protect against external influences. The CONTI-V® is used for drives throughout mechanical engineering.
Download data sheets
22/C
Optibelt VB
The Optibelt VB wrapped rubber V-belt is classified according to DIN 2215. It is suitable for use in a wide range of applications, provides excellent operational reliability and is unmeasured and hence suitable for use in sets. Special non-standard versions of the Optibelt VB also enable challenging drives to be realised.
Download data sheets
22/C
25/-
Rubber V-belts classified according to DIN 2215 represent classic V-belts and have the following dimensions with profile 25/-: upper belt width 25 mm, belt height 16 mm. These V-belts are primarily used in general mechanical engineering.
CONTI-V®
Optibelt VB
Classic wrapped rubber V-belt classified according to DIN 2215. The Optibelt VB has a wide range of applications and boasts excellent operational reliability. It is unmeasured and so can be used in sets, enabling the realisation of challenging drives, thanks to special non-standard versions.
Download data sheets
25/-
32/D
Rubber V-belts, classified according to DIN 2215, represent classic V-belts and have the following dimensions with profile 32/D: upper belt width 32 mm, belt height 20 mm. They are widely used in the classic mechanical engineering, particularly in drives with small pulley diameters.
CONTI-V®
The CONTI-V® is a classic wrapped rubber V-belt classified according to DIN 2215. It is suitable for use in complex drives in the entire mechanical engineering sector. Its polyester tension cord, fabric wrapping and natural rubber core make it a robust rubber V-belt.
Download data sheets
32/D
Optibelt VB
The Optibelt VB is a classic wrapped rubber V-belt classified according to DIN 2215. It features a polyester tension cord, upper and lower core and fabric wrapping. Its extensive applications and excellent operational reliability are two features that characterise the Optibelt VB. It is unmeasured and so can be used in sets, enabling challenging drives to be produced, thanks to special non-standard versions.
Download data sheets
32/D
40/E
Classic rubber V-belts are classified according to DIN 2215 and profile 40/E has the following dimensions: upper belt width 40 mm, belt height 25 mm. These rubber V-belts are used in traditional mechanical engineering, primarily in drives with small pulley diameters.
CONTI-V®
CONTI-V®, a classic wrapped rubber V-belt, classified according to DIN 2215, is suitable for use in complex drives throughout the entire field of mechanical engineering. Its fabric wrapping, natural rubber core and polyester tension cord are features that make the CONTI-V® a V-belt for robust drives.
Download data sheets
40/E
Optibelt VB
The Optibelt VB, classified according to DIN 2205, is a classic fabric-wrapped rubber V-belt. Its polyester tension cord makes it suitable for a wide range of applications. The Optibelt VB impresses with its excellent operational reliability, usability in sets without measurement and special non-standard versions for challenging drives.
Download data sheets
40/E
ZX/X10
Traditional raw-edge rubber V-belts with profile ZX, classified according to DIN 2215, have the following dimensions: upper belt width 10 mm, belt height 6 mm. These V-belts are preferably used with extremely small pulley diameters, high speeds and higher ambient temperatures.
CONTI-V® FO
The raw-edge CONTI-V® FO rubber V-belt conforms to DIN 2215 and is characterised by temperature resistance from -30° to +70° and excellent flexibility. These rubber V-belts are outstanding particularly in industrial drives operating at high speed and with small belt pulleys.
Download data sheets
ZX
Optibelt SUPER TX M=S
The Optibelt SUPER TX M=S is a raw-edge rubber V-belt classified according to DIN 2215. It boasts a polyester tension cord and a belt base consisting of a polychloroprene-rubber compound with fibres at right angles to the running direction. Excellent flexibility, extreme transverse stiffness and abrasion resistance are features that characterise the Optibelt SUPER TX M=S.
Download data sheets
ZX
AX/X13
Raw-edge rubber V-belts, classified according to DIN 2215, with an AX profile have the following dimensions: upper belt width 13 mm, belt height 8 mm. These rubber V-belts are preferably used with extremely small pulley diameters, with high performance demands and with higher ambient temperatures.
CONTI-V® FO
The raw-edge CONTI-V® FO rubber V-belt conforms to the DIN 2215 standard and is characterised by its temperature resistance from -30° to +70°, as well as very good flexibility. These rubber V-belts can be used above all in industrial drives with high speeds and small pulley diameters.
Download data sheets
AX
Optibelt SUPER TX M=S
The Optibelt SUPER TX M=S has a polychloroprene belt base with fibres at right angles to the running direction and a polyester tension cord in an embedding compound. This raw-edge rubber V-belt is classified according to DIN 2215. Excellent flexibility, extreme transverse stiffness and abrasion resistance are features that characterise the Optibelt SUPER TX M=S.
Download data sheets
AX
BX/X17
Raw-edge rubber V-belts with BX profile conform to DIN 2215 and have the following dimensions: upper belt width 17 mm, belt height 11 mm. Extremely small pulley diameter, high speeds and higher ambient temperatures are the preferred applications for these rubber V-belts.
CONTI-V® FO
Optibelt SUPER TX M=S
The raw-edge Optibelt SUPER TX M=S rubber V-belt is classified according to DIN 2215. Its polyester tension cord and polychloroprene-rubber compound belt base with fibres at right angles to the running direction guarantee a high level of flexibility. Excellent transverse stiffness and abrasion resistance are features that characterise the Optibelt SUPER TX M=S.
Download data sheets
BX
CX/X22
Raw-edge rubber V-belts with CX profile, are classified according to DIN 2215 and have the following dimensions: upper belt width 22 mm, belt height 14 mm. Small pulley diameter, high speeds and ambient temperatures are its main characteristics for use.
CONTI-V® FO
Optibelt SUPER TX M=S
Conforming to DIN 2215, the Optibelt SUPER TX M=S is a raw-edge rubber V-belt. It features a polyester tension cord and a polychloroprene-rubber compound belt base with fibres at right angles to the running direction. The rubber V-belt Optibelt SUPER TX M=S stands out, in particular, on account of its excellent flexibility, extreme transverse stability and abrasion resistance.
Download data sheets
CX