Endless welded

PU flat belts are also manufactured as endless welded lengths. They provide an alternative to chains and cable systems and are impressive as a maintenance-free and space-saving solution. These polyurethane drive belts are often used predominantly in production processes, which require high levels of precision, running accuracy and low vibration. Continuously welded PU flat belts are offered by BRECO®.

Properties:

  • Low noise
  • Wear-resistant
  • Minimal space requirement
  • Minimal elongation
  • Constant length
  • Temperature-resistant from -30°C to +80°C (Please request technical advice for applications below -10°C and above +50°C).


Please refer to the respective data sheet for more detailed properties of the individual timing belts.

BRECO® F2

The BRECO® F2 is a PU flat belt, which is manufactured in open lengths and can be continuously welded. All tension members are arranged parallel to the edges of the belt, however in the join area, only half of the tension members assume part of the load.

Its applications include lifting tables, lift systems, car washes or similar. This PU flat belt is available in belt widths 25 mm, 32 mm, 50 mm, 75 mm and 100 mm. It is either supplied with steel or stainless steel tension member. The belt backing and running side are both made of polyurethane. The BRECO® F2 polyurethane flat belt, endless welded, is maintenance-free and is characterised by its low stretch.

Download data sheets 
F2

BRECO® F2.2

The BRECO® F2.2 is a polyurethane flat belt manufactured in open lengths, which can be welded to produce endless flat belts. Its tension members are arranged parallel to the edges of the belt, however in the join area, only half of the tension members assume part of the load.

The key applications include lifting tables, lift systems or car washes. This polyurethane flat belt is available in the belt widths 20 mm, 25 mm, 30 mm, 32 mm, 40 mm, 50 mm, 75 mm and 100 mm. Its tension member is either manufactured from steel or stainless steel. The belt backing and running side are both made of polyurethane. This BRECO® F2.2 PU flat belt is maintenance-free and exhibits low stretch.

Download data sheets
F2.2

BRECO® F2.5

The BRECO® F2.5 is manufactured in open lengths. This polyurethane flat belt can subsequently be welded to produce endless lengths. The tension members used are arranged parallel to the edges of the belt, however in the join area, only half of the tension members assume part of the load.br>
Its applications include lifting tables, lift systems or car washes. The polyurethane flat belt is available with belt widths 50 mm and 100 mm. Its tension members are either made of steel or stainless steel. The belt backing and running side are both made of polyurethane. This BRECO® F2.5 PU flat belt is maintenance-free and exhibits low stretch.

Download data sheets
F2.5

BRECO® F3

The BRECO® F3 PU flat belt is available as an endless welded belt. Its tension members are arranged parallel to the belt edges. However in the join area, half of the tension members assume part of the load. It is used in lifting tables, lift systems or car washes.

This PU flat belt is available with belt widths 30 mm, 50 mm and 100 mm. The tension members can either be manufactured in steel or stainless steel. The belt backing and running side are both made of polyurethane. This BRECO® F3 PU flat belt is maintenance-free and exhibits low stretch.

Download data sheets
F3

BRECO® F6

The BRECO® F6 polyurethane flat belt can be welded as endless lengths. The tension members are arranged parallel to the edges of the belt, however only half of the tension members assume part of the load in the join area. Its applications include lifting tables, lift systems or car washes.

This PU flat belt is available with a belt width of 30 mm. The tension members can either be made of steel or stainless steel. The backing and running side are made of polyurethane. This BRECO® F6 PU flat belt is maintenance-free and exhibits low stretch

Download data sheets
F6