Rubber-metal elements are suitable for universal use in mechanical engineering and industrial plant construction. They are used to absorb vibration and reduce noise levels. These isolators are frequently used, above all on account of the good isolation properties of rubber. The construction of the rubber compound as well as the shaping enable the required specific properties to be achieved.
Rubber-metal buffers
Buffers are used for the spring bearing of small and medium loads in many sectors. These universal round bearings perform many varied vibration control tasks in the mechanical engineering, plant and motor construction sectors.
Properties:
- Resistant to corrosion
- Maintenance-free
- Resistant to oil and weathering if required
- Large range of uses
Please refer to the respective data sheet for more detailed properties of the individual rubber-metal buffers.
A-buffers
A-buffers have threaded bolts on both sides and are ideal for the spring bearing of small and medium loads. These universal round bearings perform many varied vibration control tasks in the mechanical engineering, plant and motor construction sectors. A-buffers are available with diameters of 4 mm to 200 mm and heights of 6 mm to 100 mm.
Download data sheets
A-buffers
B-buffers
B-buffers have one threaded bolt and a female thread. They are suitable for the spring bearing of small and medium loads. These universal round bearings perform many varied vibration control tasks in the mechanical engineering, plant and motor construction sectors. B-buffers are available with diameters of 6 mm to 200 mm and heights of 6 mm to 100 mm.
Download data sheets
B-buffers
C-buffers
C-buffers have a female thread on both sides. They are suitable for the spring bearing of small and medium loads. These universal round bearings perform many varied vibration control tasks in the mechanical engineering, plant and motor construction sectors. C-buffers are available with diameters of 8 mm to 200 mm and heights of 8 mm to 100 mm.
Download data sheets
C-buffers
D-buffers
E-buffers
DS-buffers
DS buffers are available in diameters from 15 mm to 100 mm and heights from 14 mm to 50 mm.
Data sheet Download
DS-buffers
ES-buffers
ES buffers are available in diameters from 15 mm to 100 mm and heights from 14 mm to 50 mm.
Data sheet Download
ES-buffers
AT-buffers
AT-buffers have a side cut and threaded bolts on both sides. They are suitable for the spring bearing of small and medium loads. These universal round bearings perform many varied vibration control tasks in the mechanical engineering, plant and motor construction sectors. AT-buffers are available with diameters of 10 mm to 165 mm and heights of 8 mm to 75 mm.
Download data sheets
AT-buffers
BT-buffers
BT-buffers have a side cut and one threaded bolt and one female thread. They are suitable for the spring bearing of small and medium loads. These universal round bearings perform many varied vibration control tasks in the mechanical engineering, plant and motor construction sectors. BT-buffers are available with diameters of 15 mm to 165 mm and heights of 15 mm to 75 mm.
Download data sheets
BT-buffers
CT-buffers
CT-buffers have a side cut and a female thread on both sides. They are suitable for the spring bearing of small and medium loads. These universal round bearings perform many varied vibration control tasks in the mechanical engineering, plant and motor construction sectors. CT-buffers are available with diameters of 30 mm to 165 mm and heights of 20 mm to 75 mm.
Download data sheets
CT-buffers
AK-buffers
AK-buffers have a side cut and threaded bolts on both sides. They are suitable for the spring bearing of small and medium loads. These universal round bearings perform many varied vibration control tasks in the mechanical engineering, plant and motor construction sectors. AK-buffers are available with diameters of 30 mm to 160 mm and heights of 20 mm to 75 mm.
Download data sheets
AK-buffers
CK-buffers
CK-buffers have a side cut and a female thread on both sides. They are suitable for the spring bearing of small and medium loads. These universal round bearings perform many varied vibration control tasks in the mechanical engineering, plant and motor construction sectors. CK-buffers are available with diameters of 30 mm to 160 mm and heights of 20 mm to 75 mm.
Download data sheets
CK-buffer
KP-buffers
KP buffers are available in diameters from 20 mm to 165 mm and heights from 19 mm to 195 mm.
Data sheet Download
KP-buffers
K-buffers
KE-buffers
KE buffers are conical and parabolic shaped with a highly progressive characteristic. They are used to limit vibration fluctuations, shocks and spring travel. They reduce peak voltages in parallel-connected springs and increase their safety against overloading. KE buffers are available in diameters from 50 mm to 125 mm and heights from 35 mm to 90 mm.
Data sheet Download
KE-buffers
Rubber-metal rails
Rubber-metal rails are primarily used for the spring bearing of extremely heavyweight components, machines or foundations. These rails are available in various designs and so can be ideally adapted to the respective conditions of use. Properties:
- Variable lengths
- Maintenance-free
- Large range of uses
Please refer to the respective data sheet for more detailed properties of the individual rubber-metal rail.
A-rails
A-rails have a steel base plate on both sides, which lies flush with the rubber. They are ideal universal bearing elements for very large loads and are very suitable for bearings with an asymmetrical centre of gravity. A-rails are available in widths of 40 mm to 200 mm and heights of 20 mm to 110 mm.
Download data sheets
A-rails
F-rails
AV-rails
AV-rails have a steel base plate on both sides, which lies flush with the rubber. They are ideal universal bearing elements for very large loads and are very suitable for bearings with an asymmetrical centre of gravity. AV-rails are available in widths of 50 mm to 100 mm and heights of 35 mm to 80 mm.
Download data sheets
AV-rails
C-rails
D-rails
U-rails
U-rails have two rubber inserts and have medium self-oscillation figures in the vertical direction with outstanding transverse stability. They are ideal as bearing elements for asymmetrical centres of gravity. U-rails are available in a width of 110 mm and a height of 35 mm with lengths of 2000 mm to 25 mm.
Download data sheets
U-rails
Schwingmetall
Schwingmetall solutions absorb vibrations and structure-borne noise, isolate machine vibrations and reduce acceleration. Demand-led product solutions and the optimum combination of different materials ensure that these products meet the most diverse requirements in the vehicle industry, in plant or equipment construction.
Properties:
- Versatile uses
- Maintenance-free
- Large range of uses
Please refer to the respective data sheet for more detailed properties of the individual Schwingmetall solutions.
Stoppers
Stoppers are used to limit vibration deflections in spring bearings. They also permit the soft absorption of moving masses with a high level of kinetic energy.
Download data sheets
Stoppers
Cone mounts
Cone mounts are power unit mounts for medium loads. They provide excellent transverse stability in relation to their axial stiffness, thanks to their good radial stiffness. These mounts have good end stops by the use of the appropriate disks.
Download data sheets
Cone mounts
Topfelemente
Dome mounts are the solution for level-controlled, attachment-free bearing of machines and units. These elements can be adjusted precisely to the height of the machine, thanks to their integrated level control. An underlay mat provides for fastening-free installation without the need for any anchoring.
Download data sheets
Dome mounts
Flange elements
Flange elements are simple and sturdy solutions for medium-weight masses. They provide protection against tear-off by the use of stop disks on their upper and lower sides.
Download data sheets
Flange elements
Inclined mounts
Inclined mounts are designed to be used in conjunction with inclined bearings with a natural frequency of up to 3.7 Hz. They are used with buffers or rails and are characterised by their very good transverse stability. Any transverse forces produced as a result of their wedge effect have to be absorbed by the foundation. They can be combined with buffers or rails.
Download data sheets
Inclined bearings
Torsion elements
Torsion elements are available as ring elements, torsion bushes and torsion mounts. They are used as bearings for shafts. Ring elements provide flexible mounting for shafts and are also suitable for axial loads. Torsion bushes transmit torque jolt-free and are also suitable for axial loads. Torsion mounts flexibly affix shaft ends to flat surfaces and permit axial, radial, torsional and cardanic movements.
Download data sheets
Ring elements - Torsion bushes - Torsion mounts
Special elements
Special elements include bell mounts, roof elements, cap elements and device elements. Bell mounts are used for the mounting of suspended loads. Roof elements have versatile uses as unit mounts, which can be aligned stable in the longitudinal direction and soft in the transverse direction. Cap elements are suitable for small masses and offer the same stiffness in a vertical and transverse direction. Device elements are used with small masses with a low natural frequency.
Download data sheets
Bell mounts - Roof elements - Cap elements - Device elements
Hydromounts
Hydromounts are available in three different series. Hydromount Series V is used with small to average loads and quickly suppresses the natural vibrations of the system. Hydromount Series V plus is very good at cushioning shocks and also has an integrated rebound stop. Hydromount Series K includes robust and tear-proof hydromounts with very good transverse stiffness.
Download data sheets
Hydromount Series V
Hydromount Series V plus
Hydromount Series K
Rubber-metal bushings
bushings
Download data sheets
Bushings
Spherical bearing
Download data sheet
Spherical bearing
core sleeve
Download data sheet
Core sleeve